The digital study of evaluating contact areas of the 2~5 metacarpophalangeal joint
KANG Yong-qiang, RUI Yong-jun, WU Yong-wei, MA Yun-hong, YANG Tong, PAN Xiao-yun, YU Jiong, GU Jun, HUI Tao-tao, XU Peng
Chinese Journal of Clinical Anatomy ›› 2018, Vol. 36 ›› Issue (4) : 375-379.
The digital study of evaluating contact areas of the 2~5 metacarpophalangeal joint
Objective To build the 3-dimensional(3D) model and measure the effective joint contact areas of the metacarpophalangeal joint (MPJ) during flexion. Methods Ten healthy volunteers whose hands had no previous trauma or other pathological diseases were examined. All volunteers were male and right-handed. Three-dimensional computed tomography (CT) scanning was performed at 30° intervals during passive flexion from 0° to 90° with use of a CT scanner. The images data were obtained from CT scanning and then imported into the image processing software Mimics 17.0 to build the 3D model. the effective joint contact areas and the width of the contact region of the four fingers were measured in the model. The software SPSS 22.0 was adopted for data analysis. Results In the process of 2-5 MPJ flexion, the contact areas involved in joint activities from the dorsal to palm side gradually increased. From 0° to 90° flextion, The estimated MCH contact areas for the index finger was from (32.92±2.47) mm2 to (80.05±2.51) mm2; the middle finger from (35.90±2.48) mm2 to (88.63±2.04) mm2, the ring finger from (31.51±1.07) mm2 to (74.84±1.88) mm2, and the little finger from (26.19±2.12) mm2 to (57.80±0.81) mm2，respectively. Conclusion In the process of 2~5 MPJ flexion, the view from the coronal plane, only about 1/2 of the articular surface belongs to the effective joint contact surface at 0 ° position, and all surfaces belong to the effective joint contact surfaces at 90° position, showing a trapezoidal increase in the contact areas.
Metacarpophalangeal joint； Three-dimensional reconstruction; Digital technology; / Contact areas
[1] 高士濂.实用解剖图谱(上肢分册)[M]. 第3版.上海: 上海科学技术出版社, 2012, 274.
[2] 芮永军, 施海峰, 糜菁熠, 等. 外伤性掌指关节僵硬的手术治疗[J]. 中国修复重建外科杂志, 2011, 25(5):538-541.
[3] Micev AJ, Gaspar MP, Culp RW. Osteochondral autograft transfer for treatment of metacarpophalangeal and interphalangeal cartilage defects[J]. Tech Hand Surg, 2016, 20(3):108-112.
[4] Rizzo M. Metacarpophalangeal joint arthritis[J]. J Hand Surg Am, 2011, 36(2):345-353.
[5] Vitale MA, Fruth KM, Rizzo M, et al. Prosthetic arthroplasty versus arthrodesis for osteoarthritis and posttraumatic arthritis of the index finger proximal interphalangeal joint[J]. J Hand Surg Am, 2015, 40(10):1937-1948.
[6] Martin AS, Awan HM. Metacarpophalangeal arthroplasty for osteoarthritis[J]. J Hand Surg Am, 2015, 40(9):1871-1872.
[7] Breyer JM, Vergara P, Parra L, et al. Metacarpophalangeal and interphalangeal joint arthrodesis: a comparative study between tension band and compression screw fixation[J]. J Hand Surg Eur Vol, 2015, 40(4):374-378.
[8] Kataoka T， Moritomo H，Miyake J, et al. Changes in shape and length of the collateral and accessory collateral ligaments of the metacarpophalangeal joint during flexion[J]. J Bone Joint Surg Am, 2011, 93(14):1318-1325.
[9] 李征, 张振伟, 廖坚文, 等. 第 2~5 掌指关节及其附属结构的解剖和临床意义[J].中国临床解剖学杂志, 2009, 27(5):526-528.
[10] Moran M, Hemann JH, Greenwald AS. Finger joint contact areas and pressures[J]. J Orthop Res, 1985, 3(1):49-55.
[11]王力刚, 胡溱. 掌指关节的三维解剖及形态分析[J]. 解剖与临床, 2005, 10(2):92-94.
[12]Tamai K, Ryu J, An KN, et al. Three-dimensional geometric analysis of the metacarpophalangeal joint[J]. J Hand Surg,1988,13(4):521-529.
[13]Smith RD, Holcomb GR. Articular surface interrelationships in finger joints[J]. Acta Anat,1958, 32(3):217-229.
/
| 〈 |
|
〉 |
