经口咽枢椎椎弓根逆向精确置钉的个性化组合式导航模板的研究
朱美松,彭鹏,周潇齐,苏泽鑫,李思敬,李鉴轶,林荔军
中国临床解剖学杂志 ›› 2018, Vol. 36 ›› Issue (6) : 669-673.
经口咽枢椎椎弓根逆向精确置钉的个性化组合式导航模板的研究
Experimental study on the grouped individual guide template assisted C2 transoral pedicle placement
目的 利用CT三维重建、计算机辅助设计与快速成型技术为经口咽枢椎椎弓根逆向置钉设计制作一种新型的组合式个性化精确定位置钉的导航模板。 方法 取4具成人颈椎标本进行CT扫描，在Mimics14.11中重建寰枢椎三维模型，将该模型结合经口咽寰枢椎复位钢板（transoral atlantoaxial reduction plate, TARP）导入Solidworks 2014软件，设计经口咽枢椎椎弓根组合式个性化导航模板。采用快速成型技术制备组合式个性化导航模板，经该导航模板辅助在枢椎标本上置入椎弓根钉，根据术后CT数据评价椎弓根钉道位置。 结果 使用4个导向模板辅助置入8个枢椎椎弓根钉道，术后CT扫描计算水平面绝对偏差值为（0.85±0.70）mm，矢状面为（0.88±0.53）mm，水平面和矢状面的偏差值均无统计学差异（P>0.05）。在椎弓根螺钉钉道评价分析中，I型螺钉为7枚（87.5%），II型螺钉1枚（12.5%），所有螺钉处于可接受位置。 结论 本研究提出了一种新型组合式个性化导航模板用于辅助经口咽枢椎椎弓根螺钉准确置入，其操作简单，准确性高，为经口咽枢椎椎弓根精准置钉提供了一种全新、安全的方法。
Objective Using of 3D reconstruction, computer aided design and rapid prototyping(RP)technology to design and manufacture a novel grouped individual guide template for assisting C2 transoral pedicle placement. Methods After CT scanning of 4 adult cadaveric cervical specimens, 3D reconstruction models of upper cervical vertebrae were obtained by Mimics. Then 3D models of C1, C2 and the TARP were imported into Solidworks 2014 to design a grouped individual guide template for AAD. With the technology of rapid prototyping, the grouped individual guide template for AAD was manufactured. The templates were used for C2 transoral pedicle placement in cadavers. Subsequently, CT scan was performed to evaluate the screw position. Results All 8 K-wires were inserted into the cervical pedicles. The absolute deviations were (0.85±0.70) mm in axial plane and (0.88±0.53) mm in sagittal plane. No significant differences of the absolute deviations was observed on both the axial and sagittal planes（P>0.05）. In the classification of screw position, 7 screws position were in Type I, and 1 screw was in Type II. Conclusion C2 transoral pedicle placement assisted by the grouped individual guide template is highly accurate and simple. It is a new alternative to C2 transoral pedicle placement.
经口咽寰枢椎复位钢板 / 寰枢椎脱位 / 导航模板 / 经口咽枢椎椎弓根逆向置钉
Transoral atlantoaxial reduction plate / Atlantoaxial dislocation / Individual guide templates / C2 transoral pedicle placement
[1] Yin QS, Li XS, Bai ZH, et al. An 11-year review of the TARP procedure in the treatment of atlantoaxial dislocation[J]. Spine, 2016, 41(19): E1151-E1158.
[2] Xu J, Yin Q, Xia H, et al. New clinical classification system for atlantoaxial dislocation[J]. Orthopedics, 2013, 36(1): e95-e100.
[3] Ai FZ, Yin QS, Xu DC, et al. Transoral atlantoaxial reduction plate internal fixation with transoral transpedicular or articular mass screw of C2 for the treatment of irreducible atlantoaxial dislocation[J]. Spine, 2011, 36(8): E556-E562.
[4] Xu R, Kang A, Ebraheim NA, et al. Anatomic relation between the cervical pedicle and the adjacent neural structures[J]. Spine (Phila Pa 1976), 1999, 24(5): 451-454.
[5] Bransford RJ, Russo AJ, Freeborn M, et al. Posterior C2 instrumentation: accuracy and complications associated with four techniques[J]. Spine, 2011, 36(14): E936-E943.
[6] Bydon M, Mathios D, Macki M, et al. Accuracy of C2 pedicle screw placement using the anatomic freehand technique[J]. Clin Neurol Neurosurg, 2014, 125: 24-27.
[7] Tessitore E, Bartoli A, Schaller K, et al. Accuracy of freehand fluoroscopy-guided placement of C1 lateral mass and C2 isthmic screws in atlanto-axial instability[J]. Acta Neurochir(Wien), 2011, 153(7): 1417-1425.
[8] Ondra SL, Marzouk S, Ganju A, et al. Safety and efficacy of C2 pedicle screws placed with anatomic and lateral C-arm guidance[J]. Spine (Phila Pa 1976), 2006, 31(9): E263-E267.
[9] Lu S, Xu YQ, Chen GP, et al. Efficacy and accuracy of a novel rapid prototyping drill template for cervical pedicle screw placement[J]. Comput Aided Surg, 2011, 16(5): 240-248.
[10] Sugawara T, Higashiyama N, Kaneyama S, et al. Multistep pedicle screw insertion procedure with patient-specific lamina fit-and-lock templates for the thoracic spine: clinical article[J]. J Neurosurg Spine, 2013, 19(2): 185-190.
[11] Jiang L, Dong L, Tan M, et al. A modified personalized image-based drill guide template for atlantoaxial pedicle screw placement: aclinical study[J]. Med Sci Monit, 2017, 23: 1325-1333.
[12] Lu S, Xu YQ, Lu WW, et al. A novel patient-specific navigational template for cervical pedicle screw placement[J]. Spine (Phila Pa 1976), 2009, 34(26): E959-E966.
[13] Lu S, Zhang YZ, Wang Z, et al. Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template[J]. Med Biol Eng Comput, 2012, 50(7): 751-758.
[14] Kong X, Tang L, Ye Q, et al. Are computer numerical control (CNC)-manufactured patient-specific metal templates available for posterior thoracic pedicle screw insertion? Feasibility and accuracy evaluation[J]. Eur Spine J, 2017, 26(11): 2927-2933.
[15] Fu M, Lin L, Kong X, et al. Construction and accuracy assessment of patient-specific biocompatible drill template for cervical anterior transpedicular screw (ATPS) insertion: an in vitro study[J]. PLoS One, 2013, 8(1): e53580.
国家自然科学基金(31771330)；广东省科技计划项目(2014A020212200,2015A040404022,2015B010125006,2015B010125005)；广州市科技计划项目(201704020129, 201704020069)
京ICP备08002354号-3/
| 〈 |
|
〉 |
